Dry-type Transformer

Dry-type Transformer

Current Position: 首页 > Product Center > Dry-type Transformer

Contact UsContact Us

Yunding Transformer

Contact Person: Mr. Xu

Mobile:18118309299

Tel:4000-828-500

Fax:0616-83723555

Email: kefu@wstx.com.cn

Address: 6th Floor, Building C-2-B, Xuzhou Software Park, Quanshan District, Xuzhou City, Jiangsu Province, China

Dry-Type Transformer

Dry-Type Transformer

  • Category: Dry-type Transformer
  • Views: 31times
  • QR Code:
  • Published: 2026-07-10 22:30:58
  • Product Overview

A dry-type transformer is a power transformer whose core and windings are not immersed in insulating liquid, using air or other gases as the cooling medium. It is a commonly used distribution device in power transmission and distribution systems, with mature technology and adaptability to various application scenarios.

I. Core Structure

- Core: Made of laminated cold-rolled grain-oriented silicon steel sheets, forming a closed magnetic circuit, effectively reducing hysteresis loss and eddy current loss, ensuring stable operation of the equipment.

- Windings: Wound with copper or aluminum conductors, divided into high-voltage and low-voltage windings. Some adopt epoxy resin casting or glass fiber reinforced epoxy resin casting processes to enhance insulation performance.

- Cooling System: Mainly adopts two methods: natural air cooling (AN) and forced air cooling (AF). Natural air cooling can meet long-term continuous operation under rated capacity, while forced air cooling can increase the output capacity of the equipment.

- Insulation Components: Insulation cylinders are arranged between the high and low voltage windings, and the winding surfaces are wrapped with insulating materials. The fasteners for component connections are all anti-loosening, ensuring insulation safety.

- Protective Accessories: Equipped with temperature monitoring devices, insulation monitoring components, etc., to provide timely feedback on the equipment's operating status, assisting in ensuring safe and stable operation.

II. Working Principle

Based on the principle of electromagnetic induction: When alternating current is applied to the primary winding, an alternating magnetic flux is generated, which is coupled and transmitted to the secondary winding through the core, inducing electrical energy at different voltage levels, achieving voltage step-up or step-down. The heat generated during equipment operation is dissipated through air convection or forced air cooling, ensuring the equipment operates within a reasonable temperature range.

III. Main Features

- Advantages: No risk of insulating oil leakage, environmentally friendly; good fire and flame retardant performance, suitable for scenarios with high fire protection requirements; simple operation and maintenance procedures, no need for regular oil quality maintenance; low operating noise, moderate size, easy to install and transport.

- Precautions: Insulation performance is significantly affected by ambient humidity and dust, requiring installation in a clean and dry environment; heat dissipation for large-capacity equipment is relatively difficult, requiring a properly configured cooling system.

IV. Common Classifications

- By Insulation Type: Epoxy resin cast dry-type transformer, impregnated dry-type transformer, with the epoxy resin cast type being more widely used.

- By Cooling Method: Natural air cooling (AN) dry-type transformer, forced air cooling (AF) dry-type transformer.

- By Application: Distribution dry-type transformer (for terminal power distribution), power dry-type transformer (for medium and low voltage transmission and distribution), special dry-type transformer (e.g., for traction, rectification, isolation, etc.).

V. Application Scenarios

Suitable for high-rise buildings, underground buildings, airports, theaters, subways, commercial centers, and other places with high personnel density and high fire protection requirements. It can also be used in scenarios where oil-immersed transformers are not suitable, such as auxiliary power for thermal power plants and hydropower plants, generator excitation, and indoor power distribution in industrial and mining enterprises.


Tags

Copyright © All Rights Reserved © 2026 V Cloud. All Rights Reserved. Su ICP No. 2021023845-16

Product Inquiry